Skip to content
Fault code dictionary (DTC)

P2592 — Cruise control front distance sensor, right side

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe standard definition of this code refers to a sensor that measures the distance to the vehicle ahead, on the right side, for the speed control system. How this function is built varies a lot between manufacturers, and I have no reliable information on the exact component used on your brand. The control unit has detected a problem with this sensor or its signal.
FamilyPowertrain (P)

Typical symptoms

Adaptive cruise control will not engage or switches off by itself
Warning light or message on the dashboard
Distance keeping to the vehicle ahead does not work
Automatic braking or acceleration missing or odd

Common causes

Sensor dirty or covered by mud, ice or stickers
Sensor misaligned after an impact or bumper work
Damaged or corroded connector or wiring
Faulty sensor
Low supply voltage or a communication problem with the control unit

What to do

First check that the sensor area on the front of the car is clean and intact, with no signs of impact. Then the car needs to be read with a diagnostic tool specific to your brand. The car is still drivable, but do not rely on the cruise control until this is sorted.

How to read code P2592

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P2592 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (92) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P2592 mean?

Cruise control front distance sensor, right side. The standard definition of this code refers to a sensor that measures the distance to the vehicle ahead, on the right side, for the speed control system. How this function is built varies a lot between manufacturers, and I have no reliable information on the exact component used on your brand. The control unit has detected a problem with this sensor or its signal.

Can I keep driving with code P2592 active?

With caution: limp mode possible, have it checked soon

Common causes — P2592

Sensor dirty or covered by mud, ice or stickers Sensor misaligned after an impact or bumper work Damaged or corroded connector or wiring Faulty sensor Low supply voltage or a communication problem with the control unit

How do you fix code P2592?

First check that the sensor area on the front of the car is clean and intact, with no signs of impact. Then the car needs to be read with a diagnostic tool specific to your brand. The car is still drivable, but do not rely on the cruise control until this is sorted.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes