Skip to content
Fault code dictionary (DTC)

P259A — Turbo B boost control position sensor: stuck low

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit has seen that the position sensor controlling turbo B boost stays at a low value and does not follow commands. It may be the sensor reading wrongly, or the part that regulates boost not moving. The result is uncontrolled turbo B pressure.
FamilyPowertrain (P)

Typical symptoms

Engine warning light on
Little power and a turbo that seems not to push
Sluggish response when accelerating
Limp mode
Black smoke or higher fuel use in some cases

Common causes

Turbo regulation mechanism clogged with deposits and stuck
Faulty electric or vacuum actuator
Broken or disconnected vacuum hoses or linkages
Faulty position sensor
Damaged wiring or connector

What to do

Have the linkages, hoses and free movement of the turbo B actuator checked first. You can drive with care, but with reduced power. Do not push the engine, and have it checked soon.

How to read code P259A

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P259A starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (9A) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P259A mean?

Turbo B boost control position sensor: stuck low. The control unit has seen that the position sensor controlling turbo B boost stays at a low value and does not follow commands. It may be the sensor reading wrongly, or the part that regulates boost not moving. The result is uncontrolled turbo B pressure.

Can I keep driving with code P259A active?

With caution: limp mode possible, have it checked soon

Common causes — P259A

Turbo regulation mechanism clogged with deposits and stuck Faulty electric or vacuum actuator Broken or disconnected vacuum hoses or linkages Faulty position sensor Damaged wiring or connector

How do you fix code P259A?

Have the linkages, hoses and free movement of the turbo B actuator checked first. You can drive with care, but with reduced power. Do not push the engine, and have it checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes