Skip to content
Fault code dictionary (DTC)

P25A2 — Brake system module requested engine warning light

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThis code does not point to a fault in the engine itself. The brake system control unit (for example ABS or stability control) has requested the engine warning light because it found a problem that can affect emissions or engine operation. The exact problem depends on the brand, and without reliable data on yours I cannot say what it is. The codes stored in the brake system must be read as well.
FamilyPowertrain (P)

Typical symptoms

Engine warning light on
ABS or stability control lights on at the same time
Limited or missing ABS and traction control action
Possible engine torque limitation

Common causes

Faulty wheel speed sensor or its wiring
Problem in the ABS or stability control module
Communication problem between control units
Low or unstable battery voltage
Another brake system fault that involves the engine

What to do

Have the brake system codes read as well, because that is where the cause lies. The normal brakes usually work, but ABS and stability controls may be reduced: drive with extra distance and have it checked soon.

How to read code P25A2

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P25A2 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (A2) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P25A2 mean?

Brake system module requested engine warning light. This code does not point to a fault in the engine itself. The brake system control unit (for example ABS or stability control) has requested the engine warning light because it found a problem that can affect emissions or engine operation. The exact problem depends on the brand, and without reliable data on yours I cannot say what it is. The codes stored in the brake system must be read as well.

Can I keep driving with code P25A2 active?

With caution: limp mode possible, have it checked soon

Common causes — P25A2

Faulty wheel speed sensor or its wiring Problem in the ABS or stability control module Communication problem between control units Low or unstable battery voltage Another brake system fault that involves the engine

How do you fix code P25A2?

Have the brake system codes read as well, because that is where the cause lies. The normal brakes usually work, but ABS and stability controls may be reduced: drive with extra distance and have it checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes