P25C2 — Alternative fuel disable signal: too high
| Meaning | The control unit reads too high a voltage in the signal circuit related to disabling the alternative fuel. It can indicate contact with the power supply or a faulty component generating the signal. Details depend on the manufacturer and I have no reliable information for a specific brand. |
| Family | Powertrain (P) |
Typical symptoms
Alternative fuel not being enabled or disabled correctly
Irregular running when changing fuel mode
Odd messages on the dashboard
Common causes
Damaged or moist connector
Faulty component generating the signal
Aftermarket system wired incorrectly
Control unit fault, less common
What to do
How to read code P25C2
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P25C2 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (C2) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P25C2 mean?
Alternative fuel disable signal: too high. The control unit reads too high a voltage in the signal circuit related to disabling the alternative fuel. It can indicate contact with the power supply or a faulty component generating the signal. Details depend on the manufacturer and I have no reliable information for a specific brand.
Can I keep driving with code P25C2 active?
With caution: limp mode possible, have it checked soon
Common causes — P25C2
Signal wire shorted to the power supply Damaged or moist connector Faulty component generating the signal Aftermarket system wired incorrectly Control unit fault, less common
How do you fix code P25C2?
First look at the wiring and connectors, especially where the system was modified. Have the car checked within a reasonable time to avoid fuel supply problems.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P25C1 — Alternative fuel disable signal: circuit fault
- Next code: P25C3 — Alternative fuel disable signal: too low
Related codes
- P2500 — Generator lamp / L-terminal circuit low
- P2501 — Generator lamp / L-terminal circuit high
- P2502 — Charging system voltage out of range
- P2503 — Charging system voltage too low
- P2504 — Charging system voltage too high
- P2505 — Engine control unit power input signal fault
- P2506 — Control unit power input signal out of range
- P2507 — Control unit power input signal too low
- P2508 — Control unit power input signal too high
- P2509 — Control unit power input signal intermittent
- P250A — Engine oil level sensor circuit fault
- P250B — Engine oil level sensor range/performance fault