Skip to content
Fault code dictionary (DTC)

P25C3 — Alternative fuel disable signal: too low

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit reads too low a voltage in the signal circuit related to disabling the alternative fuel. It usually indicates contact with ground or a leak in the wiring. Details depend on the manufacturer and I have no reliable information for a specific brand.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Alternative fuel not being enabled or disabled correctly
Irregular running when changing fuel mode
Signal seems to be missing

Common causes

Signal wire touching ground
Wiring with damaged insulation
Connector with moisture or corrosion
Faulty component generating the signal
Control unit fault, less common

What to do

First check the wiring and connectors for chafed, pinched or wet wires. It isn't an emergency, but have the system checked soon to avoid irregular running.

How to read code P25C3

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P25C3 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (C3) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P25C3 mean?

Alternative fuel disable signal: too low. The control unit reads too low a voltage in the signal circuit related to disabling the alternative fuel. It usually indicates contact with ground or a leak in the wiring. Details depend on the manufacturer and I have no reliable information for a specific brand.

Can I keep driving with code P25C3 active?

With caution: limp mode possible, have it checked soon

Common causes — P25C3

Signal wire touching ground Wiring with damaged insulation Connector with moisture or corrosion Faulty component generating the signal Control unit fault, less common

How do you fix code P25C3?

First check the wiring and connectors for chafed, pinched or wet wires. It isn't an emergency, but have the system checked soon to avoid irregular running.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes