P25C5 — Brake booster temperature sensor A: implausible reading
| Meaning | The control unit receives a value from the brake booster temperature sensor that doesn't match other information, for example it doesn't change or is outside what is expected. The electrical circuit may be fine, but the reading makes no sense. How it is managed depends on the manufacturer and I have no reliable information for a specific brand. |
| Family | Powertrain (P) |
Typical symptoms
Possible brake-related message
Brake pedal feeling different than usual
Brake booster working less smoothly
Sometimes no noticeable symptoms
Common causes
Connector with poor contact
Wiring with abnormal resistance
Brake booster with a real problem that makes it overheat
Control module fault, less common
What to do
How to read code P25C5
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P25C5 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (C5) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P25C5 mean?
Brake booster temperature sensor A: implausible reading. The control unit receives a value from the brake booster temperature sensor that doesn't match other information, for example it doesn't change or is outside what is expected. The electrical circuit may be fine, but the reading makes no sense. How it is managed depends on the manufacturer and I have no reliable information for a specific brand.
Can I keep driving with code P25C5 active?
With caution: limp mode possible, have it checked soon
Common causes — P25C5
Faulty or inaccurate temperature sensor Connector with poor contact Wiring with abnormal resistance Brake booster with a real problem that makes it overheat Control module fault, less common
How do you fix code P25C5?
Have the sensor and its connector checked, and verify that the brake booster isn't actually overheating. Since this involves the brakes, don't put it off for long.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P25C4 — Brake booster temperature sensor A: circuit fault
- Next code: P25C6 — Brake booster temperature sensor A: signal low
Related codes
- P2500 — Generator lamp / L-terminal circuit low
- P2501 — Generator lamp / L-terminal circuit high
- P2502 — Charging system voltage out of range
- P2503 — Charging system voltage too low
- P2504 — Charging system voltage too high
- P2505 — Engine control unit power input signal fault
- P2506 — Control unit power input signal out of range
- P2507 — Control unit power input signal too low
- P2508 — Control unit power input signal too high
- P2509 — Control unit power input signal intermittent
- P250A — Engine oil level sensor circuit fault
- P250B — Engine oil level sensor range/performance fault