Skip to content
Fault code dictionary (DTC)

P25C4 — Brake booster temperature sensor A: circuit fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected a problem in the circuit of the sensor that measures brake booster temperature, the part that helps you press the brake pedal. The code points to a general circuit fault without saying whether the signal is high or low. Where the sensor is and how it is managed depends on the manufacturer, and I have no reliable information for a specific brand.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Possible brake-related warning light or message
Brake pedal feeling different than usual
Brake booster working less smoothly
No obvious symptoms in some cases

Common causes

Corroded or loose sensor connector
Damaged wiring
Faulty temperature sensor
Fault in the module that manages the brake booster
Moisture or dirt in the connector

What to do

First check the sensor connector and wiring. Since this involves the braking system, have it checked soon, and if the brake pedal feels different from usual, don't keep driving.

How to read code P25C4

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P25C4 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (C4) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P25C4 mean?

Brake booster temperature sensor A: circuit fault. The control unit detected a problem in the circuit of the sensor that measures brake booster temperature, the part that helps you press the brake pedal. The code points to a general circuit fault without saying whether the signal is high or low. Where the sensor is and how it is managed depends on the manufacturer, and I have no reliable information for a specific brand.

Can I keep driving with code P25C4 active?

With caution: limp mode possible, have it checked soon

Common causes — P25C4

Corroded or loose sensor connector Damaged wiring Faulty temperature sensor Fault in the module that manages the brake booster Moisture or dirt in the connector

How do you fix code P25C4?

First check the sensor connector and wiring. Since this involves the braking system, have it checked soon, and if the brake pedal feels different from usual, don't keep driving.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes