P25C7 — Brake booster temperature sensor A: signal high
| Meaning | The control unit reads too high a voltage from the brake booster temperature sensor. This usually means a broken wire, an unplugged connector or a faulty sensor. How it is managed depends on the manufacturer and I have no reliable information for a specific brand. |
| Family | Powertrain (P) |
Typical symptoms
Possible brake-related message
Brake pedal feeling different than usual
Brake booster working less smoothly
Common causes
Broken sensor wire
Faulty temperature sensor
Wire shorted to the power supply
Control module fault, less common
What to do
How to read code P25C7
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P25C7 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (C7) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P25C7 mean?
Brake booster temperature sensor A: signal high. The control unit reads too high a voltage from the brake booster temperature sensor. This usually means a broken wire, an unplugged connector or a faulty sensor. How it is managed depends on the manufacturer and I have no reliable information for a specific brand.
Can I keep driving with code P25C7 active?
With caution: limp mode possible, have it checked soon
Common causes — P25C7
Sensor connector unplugged or corroded Broken sensor wire Faulty temperature sensor Wire shorted to the power supply Control module fault, less common
How do you fix code P25C7?
First check that the sensor connector is fully seated and the wiring is intact. Since it relates to the brakes, have the car checked soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P25C6 — Brake booster temperature sensor A: signal low
- Next code: P25C8 — Brake booster temperature sensor A: intermittent s...
Related codes
- P2500 — Generator lamp / L-terminal circuit low
- P2501 — Generator lamp / L-terminal circuit high
- P2502 — Charging system voltage out of range
- P2503 — Charging system voltage too low
- P2504 — Charging system voltage too high
- P2505 — Engine control unit power input signal fault
- P2506 — Control unit power input signal out of range
- P2507 — Control unit power input signal too low
- P2508 — Control unit power input signal too high
- P2509 — Control unit power input signal intermittent
- P250A — Engine oil level sensor circuit fault
- P250B — Engine oil level sensor range/performance fault