Skip to content
Fault code dictionary (DTC)

P264A — Rocker arm actuator A position sensor circuit, bank 1

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine computer detected a problem in the circuit of the sensor that reports the position of rocker arm actuator A. Without a reliable signal it cannot know whether the valve system moved as requested. This code points to a general circuit fault, without saying whether it is open or shorted.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Loss of power
Engine less lively
Uneven running in some conditions
Valve system switched off by the computer as a precaution

Common causes

Dirty, corroded or loose sensor connector
Broken or chafed sensor wiring
Faulty position sensor
Damaged actuator affecting the sensor
Internal computer fault, which is rare

What to do

Check the sensor connector and wires and the look of the actuator. The car can generally be driven with care, but a scan-tool diagnosis is the right step to find out which part has failed.

How to read code P264A

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P264A starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (4A) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P264A mean?

Rocker arm actuator A position sensor circuit, bank 1. The engine computer detected a problem in the circuit of the sensor that reports the position of rocker arm actuator A. Without a reliable signal it cannot know whether the valve system moved as requested. This code points to a general circuit fault, without saying whether it is open or shorted.

Can I keep driving with code P264A active?

With caution: limp mode possible, have it checked soon

Common causes — P264A

Dirty, corroded or loose sensor connector Broken or chafed sensor wiring Faulty position sensor Damaged actuator affecting the sensor Internal computer fault, which is rare

How do you fix code P264A?

Check the sensor connector and wires and the look of the actuator. The car can generally be driven with care, but a scan-tool diagnosis is the right step to find out which part has failed.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes