Skip to content
Fault code dictionary (DTC)

P2665 — Fuel shutoff valve B control circuit open

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine computer finds no continuity in the circuit of fuel shutoff valve 'B'. This valve closes the fuel supply in certain conditions, for example on dual-fuel vehicles (petrol/gas). Which valve is 'B' depends on the manufacturer, and I don't have reliable information on your make.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Engine will not start or stalls
Switch to the alternative fuel fails
Loss of power
Hard starting

Common causes

Broken wire in the valve circuit
Disconnected or corroded connector
Open valve coil
Missing fuse or supply
Faulty computer driver (rare)

What to do

Check the fuses, connector and wiring of the valve, then the continuity of its coil. If the engine will not start or stalls, don't keep trying: have it checked in a workshop.

How to read code P2665

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P2665 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (65) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P2665 mean?

Fuel shutoff valve B control circuit open. The engine computer finds no continuity in the circuit of fuel shutoff valve 'B'. This valve closes the fuel supply in certain conditions, for example on dual-fuel vehicles (petrol/gas). Which valve is 'B' depends on the manufacturer, and I don't have reliable information on your make.

Can I keep driving with code P2665 active?

With caution: limp mode possible, have it checked soon

Common causes — P2665

Broken wire in the valve circuit Disconnected or corroded connector Open valve coil Missing fuse or supply Faulty computer driver (rare)

How do you fix code P2665?

Check the fuses, connector and wiring of the valve, then the continuity of its coil. If the engine will not start or stalls, don't keep trying: have it checked in a workshop.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes