P2679 — Coolant degassing valve control circuit low
| Meaning | The control unit detected that the control circuit for the coolant degassing valve has too low a voltage, usually due to a short to ground. The valve is not being commanded properly and air may not be removed from the system. |
| Family | Powertrain (P) |
Typical symptoms
Unstable coolant temperature
Irregular cabin heating
Coolant level that varies
Possible overheating in serious cases
Common causes
Valve shorted
Connector with moisture or dirt
Wiring pinched or chafed
Faulty driver stage in the control unit (rare)
What to do
How to read code P2679
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P2679 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (79) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P2679 mean?
Coolant degassing valve control circuit low. The control unit detected that the control circuit for the coolant degassing valve has too low a voltage, usually due to a short to ground. The valve is not being commanded properly and air may not be removed from the system.
Can I keep driving with code P2679 active?
With caution: limp mode possible, have it checked soon
Common causes — P2679
Control wire touching ground Valve shorted Connector with moisture or dirt Wiring pinched or chafed Faulty driver stage in the control unit (rare)
How do you fix code P2679?
Check the coolant level with the engine cold and keep an eye on the temperature while driving. If it climbs too high, stop. Then have the wiring and valve inspected, because a short circuit can damage the driver.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P2678 — Coolant degassing valve control circuit open
- Next code: P267A — Rocker arm actuator position sensor B circuit, ban...
Related codes
- P2600 — Coolant pump control circuit: open
- P2601 — Coolant pump control circuit: out of range
- P2602 — Coolant pump control circuit: low
- P2603 — Coolant pump control circuit: high
- P2604 — Intake air heater A circuit: range/performance
- P2605 — Intake air heater A circuit: open
- P2606 — Intake air heater B circuit: range/performance
- P2607 — Intake air heater B circuit: low
- P2608 — Intake air heater B circuit: high
- P2609 — Intake air heater system performance
- P260A — PTO control circuit open
- P260B — PTO control circuit low