P2698 — Exhaust fuel injector A: performance
| Meaning | The control unit found that the injector delivering fuel into the exhaust is not working as expected: the amount or the effect does not match what was commanded. The electrical circuit may be fine, but the injector is not delivering correctly. |
| Family | Powertrain (P) |
Typical symptoms
Incomplete particulate filter regeneration
Particulate filter warning light on
Loss of power
Higher fuel use during regenerations
Engine oil level rising
Common causes
Injector dripping or stuck open
Insufficient fuel pressure at the injector
Leak in the fuel supply line
Exhaust temperature sensors giving wrong readings
Worn injector
What to do
How to read code P2698
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P2698 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (98) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P2698 mean?
Exhaust fuel injector A: performance. The control unit found that the injector delivering fuel into the exhaust is not working as expected: the amount or the effect does not match what was commanded. The electrical circuit may be fine, but the injector is not delivering correctly.
Can I keep driving with code P2698 active?
With caution: limp mode possible, have it checked soon
Common causes — P2698
Injector nozzle dirty or blocked Injector dripping or stuck open Insufficient fuel pressure at the injector Leak in the fuel supply line Exhaust temperature sensors giving wrong readings Worn injector
How do you fix code P2698?
Have the injector and its fuel supply checked. If the oil level rises or you smell fuel, stop and have it checked right away: unburned fuel can dilute the engine oil.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P2697 — Exhaust fuel injector A: open circuit
- Next code: P2699 — Exhaust fuel injector A: circuit low
Related codes
- P2600 — Coolant pump control circuit: open
- P2601 — Coolant pump control circuit: out of range
- P2602 — Coolant pump control circuit: low
- P2603 — Coolant pump control circuit: high
- P2604 — Intake air heater A circuit: range/performance
- P2605 — Intake air heater A circuit: open
- P2606 — Intake air heater B circuit: range/performance
- P2607 — Intake air heater B circuit: low
- P2608 — Intake air heater B circuit: high
- P2609 — Intake air heater system performance
- P260A — PTO control circuit open
- P260B — PTO control circuit low