Skip to content
Fault code dictionary (DTC)

P269B — Exhaust glow plug control: open circuit

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningOn some diesels there is a glow plug in the exhaust that helps ignite the fuel sprayed in to regenerate the filter. The control unit detects no continuity in the circuit that controls it: the circuit is open.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Particulate filter regeneration not starting or incomplete
Particulate filter warning light on
Loss of power
Engine running in reduced-power mode

Common causes

Control connector loose or corroded
Broken wire
Faulty relay or control module
Blown fuse
Fault in the control unit

What to do

First have the fuse, connector and control wiring checked. This is not a fault to ignore for long, because the filter may not clean itself.

How to read code P269B

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P269B starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (9B) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P269B mean?

Exhaust glow plug control: open circuit. On some diesels there is a glow plug in the exhaust that helps ignite the fuel sprayed in to regenerate the filter. The control unit detects no continuity in the circuit that controls it: the circuit is open.

Can I keep driving with code P269B active?

With caution: limp mode possible, have it checked soon

Common causes — P269B

Control connector loose or corroded Broken wire Faulty relay or control module Blown fuse Fault in the control unit

How do you fix code P269B?

First have the fuse, connector and control wiring checked. This is not a fault to ignore for long, because the filter may not clean itself.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes