Skip to content
Fault code dictionary (DTC)

P269C — Exhaust glow plug control: performance

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit found that the exhaust glow plug control does not respond as expected: the heating does not match what was requested. The control works, but the result is not what was expected.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Incomplete particulate filter regeneration
Particulate filter warning light on
Loss of power
Higher fuel use during regenerations

Common causes

Worn exhaust glow plug
Control module or relay working unreliably
Low supply voltage
High-resistance connections
Exhaust temperature sensors giving wrong readings

What to do

Have the glow plug, its power supply and the control connections checked. If the filter does not regenerate properly it gradually clogs, so it is better not to postpone.

How to read code P269C

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P269C starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (9C) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P269C mean?

Exhaust glow plug control: performance. The control unit found that the exhaust glow plug control does not respond as expected: the heating does not match what was requested. The control works, but the result is not what was expected.

Can I keep driving with code P269C active?

With caution: limp mode possible, have it checked soon

Common causes — P269C

Worn exhaust glow plug Control module or relay working unreliably Low supply voltage High-resistance connections Exhaust temperature sensors giving wrong readings

How do you fix code P269C?

Have the glow plug, its power supply and the control connections checked. If the filter does not regenerate properly it gradually clogs, so it is better not to postpone.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes