P26A2 — Exhaust glow plug: circuit high
| Meaning | The control unit measures a higher voltage than normal on the exhaust glow plug circuit. This usually means contact with a power supply or a fault in the control. |
| Family | Powertrain (P) |
Typical symptoms
Particulate filter regeneration not starting
Particulate filter warning light on
Loss of power
Engine running in reduced-power mode
Common causes
Damaged connector
Control stuck in the on position
Glow plug with an internal fault
Wiring damaged by heat
What to do
How to read code P26A2
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P26A2 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (A2) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P26A2 mean?
Exhaust glow plug: circuit high. The control unit measures a higher voltage than normal on the exhaust glow plug circuit. This usually means contact with a power supply or a fault in the control.
Can I keep driving with code P26A2 active?
With caution: limp mode possible, have it checked soon
Common causes — P26A2
Wire in contact with a power wire Damaged connector Control stuck in the on position Glow plug with an internal fault Wiring damaged by heat
How do you fix code P26A2?
Have the wiring and connector checked for abnormal contact. If the control stays on, the glow plug can overheat, so do not postpone for long.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P26A1 — Exhaust glow plug: circuit low
- Next code: P26A3 — Coolant bypass valve A: range/performance
Related codes
- P2600 — Coolant pump control circuit: open
- P2601 — Coolant pump control circuit: out of range
- P2602 — Coolant pump control circuit: low
- P2603 — Coolant pump control circuit: high
- P2604 — Intake air heater A circuit: range/performance
- P2605 — Intake air heater A circuit: open
- P2606 — Intake air heater B circuit: range/performance
- P2607 — Intake air heater B circuit: low
- P2608 — Intake air heater B circuit: high
- P2609 — Intake air heater system performance
- P260A — PTO control circuit open
- P260B — PTO control circuit low