Skip to content
Fault code dictionary (DTC)

P26A4 — Coolant bypass valve A position sensor circuit

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detects a problem in the circuit of the sensor that reports the position of the coolant bypass valve. The reference title does not say whether the signal is low, high or missing, so this is a general circuit fault.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Abnormal engine temperature
Weak cabin heating
Cooling fan running all the time
Unusual fuel consumption

Common causes

Sensor connector corroded or loose
Damaged wire
Faulty position sensor
Defective valve or actuator
Fault in the control unit

What to do

Have the sensor connector and wiring checked. Keep an eye on the engine temperature in the meantime: this is not a fault to ignore for long.

How to read code P26A4

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P26A4 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (A4) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P26A4 mean?

Coolant bypass valve A position sensor circuit. The control unit detects a problem in the circuit of the sensor that reports the position of the coolant bypass valve. The reference title does not say whether the signal is low, high or missing, so this is a general circuit fault.

Can I keep driving with code P26A4 active?

With caution: limp mode possible, have it checked soon

Common causes — P26A4

Sensor connector corroded or loose Damaged wire Faulty position sensor Defective valve or actuator Fault in the control unit

How do you fix code P26A4?

Have the sensor connector and wiring checked. Keep an eye on the engine temperature in the meantime: this is not a fault to ignore for long.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes