Skip to content
Fault code dictionary (DTC)

P26A5 — Bypass valve A position sensor: range/performance

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit receives from the coolant bypass valve position sensor a value outside the expected range, or one that does not match the requested movement. The sensor may be faulty, or the valve may not be moving as it should.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Abnormal engine temperature
Weak cabin heating
Cooling fan running all the time
Unusual fuel consumption

Common causes

Position sensor out of calibration or faulty
Valve stuck or stiff
Deposits in the coolant circuit
High-resistance connections
Worn actuator

What to do

Have the sensor and the valve movement checked. Also check the coolant level with the engine cold. It is better to act soon to avoid overheating.

How to read code P26A5

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P26A5 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (A5) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P26A5 mean?

Bypass valve A position sensor: range/performance. The control unit receives from the coolant bypass valve position sensor a value outside the expected range, or one that does not match the requested movement. The sensor may be faulty, or the valve may not be moving as it should.

Can I keep driving with code P26A5 active?

With caution: limp mode possible, have it checked soon

Common causes — P26A5

Position sensor out of calibration or faulty Valve stuck or stiff Deposits in the coolant circuit High-resistance connections Worn actuator

How do you fix code P26A5?

Have the sensor and the valve movement checked. Also check the coolant level with the engine cold. It is better to act soon to avoid overheating.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes