P2A59 — Vaporizer B outlet temperature signal erratic
| Meaning | The signal from the vaporizer B outlet temperature sensor reaches the control unit only at times, with jumping values. This is typical of an electrical contact that breaks with vibration or heat. The letter B refers to a unit defined by the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Sudden switches between gas and petrol
Irregular running on gas
Starting on gas not always the same
Fault more noticeable on rough roads or with a hot engine
Common causes
Wire with a nearly broken conductor
Faulty temperature sensor
Unstable ground
Moisture in the connector
Faulty control unit
What to do
How to read code P2A59
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P2A59 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (59) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P2A59 mean?
Vaporizer B outlet temperature signal erratic. The signal from the vaporizer B outlet temperature sensor reaches the control unit only at times, with jumping values. This is typical of an electrical contact that breaks with vibration or heat. The letter B refers to a unit defined by the manufacturer.
Can I keep driving with code P2A59 active?
With caution: limp mode possible, have it checked soon
Common causes — P2A59
Corroded connector or loose terminals Wire with a nearly broken conductor Faulty temperature sensor Unstable ground Moisture in the connector Faulty control unit
How do you fix code P2A59?
Gently move the wire and connector with the engine running and see whether the behavior changes, and look for corrosion or water. An intermittent fault tends to get worse, so have it checked soon. Meanwhile prefer petrol.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P2A58 — Vaporizer B outlet temperature sensor signal too h...
- Next code: P2A5A — Vaporizer C outlet temperature sensor circuit faul...
Related codes
- P2A00 — O2 sensor circuit range/performance, bank 1 sensor 1
- P2A01 — O2 sensor circuit range/performance, bank 1 sensor 2
- P2A02 — O2 sensor circuit range/performance, bank 1 sensor 3
- P2A03 — O2 sensor circuit range/performance, bank 2 sensor 1
- P2A04 — Bank 2 Sensor 2 oxygen sensor signal not plausible
- P2A05 — Bank 2 Sensor 3 oxygen sensor signal not plausible
- P2A06 — Bank 1 Sensor 1 oxygen sensor negative voltage
- P2A07 — Bank 1 Sensor 2 oxygen sensor negative voltage
- P2A08 — Bank 1 Sensor 3 oxygen sensor negative voltage
- P2A09 — Bank 2 Sensor 1 oxygen sensor negative voltage
- P2A0A — Manifold pressure sensor B circuit fault
- P2A0B — Manifold pressure sensor B signal not plausible