Skip to content
Fault code dictionary (DTC)

P2A60 — Alternative fuel tank B level reading implausible

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe value from the level sensor of alternative fuel tank B is not consistent with what is expected, for example it does not change as fuel is used or changes too quickly. The electrical circuit may be fine: the sensor itself may be giving a wrong reading. The meaning of B is defined by the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Gauge stuck or jumping
Switch to petrol while the tank still reads full
Unpredictable range on gas
Refills that do not match the reading

Common causes

Stuck or worn level sensor or float
Reading altered by deposits or residue in the tank
Multivalve problem
Connections with abnormal resistance
Incorrect calibration or control unit

What to do

Compare the reading with what you actually used and refilled, and note the mismatches to tell the technician. Checking the sensor inside the tank must be done by qualified staff. Do not rely on the gauge to plan trips on gas.

How to read code P2A60

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P2A60 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (60) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P2A60 mean?

Alternative fuel tank B level reading implausible. The value from the level sensor of alternative fuel tank B is not consistent with what is expected, for example it does not change as fuel is used or changes too quickly. The electrical circuit may be fine: the sensor itself may be giving a wrong reading. The meaning of B is defined by the manufacturer.

Can I keep driving with code P2A60 active?

With caution: limp mode possible, have it checked soon

Common causes — P2A60

Stuck or worn level sensor or float Reading altered by deposits or residue in the tank Multivalve problem Connections with abnormal resistance Incorrect calibration or control unit

How do you fix code P2A60?

Compare the reading with what you actually used and refilled, and note the mismatches to tell the technician. Checking the sensor inside the tank must be done by qualified staff. Do not rely on the gauge to plan trips on gas.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes