Skip to content
Fault code dictionary (DTC)

P2A61 — Alternative fuel tank B level sensor signal too low

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit reads too low a voltage on the circuit of the tank B level sensor. Usually the signal is shorted to ground or the sensor has failed, so the control unit cannot know how much fuel is left. The meaning of B depends on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Gauge reads empty or shows nothing
Switch to petrol
System does not use tank B
Unreliable range on gas

Common causes

Signal wire shorted to ground
Corroded or wet connector
Faulty level sensor
Pinched or chafed wiring
Faulty control unit

What to do

Check the wiring and connector of the level sensor, looking for pinched spots or contact with metal. A technician can measure the signal to tell a wire problem from a sensor problem. If you smell gas, stop in the open air and have the system checked immediately.

How to read code P2A61

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P2A61 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (61) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P2A61 mean?

Alternative fuel tank B level sensor signal too low. The control unit reads too low a voltage on the circuit of the tank B level sensor. Usually the signal is shorted to ground or the sensor has failed, so the control unit cannot know how much fuel is left. The meaning of B depends on the manufacturer.

Can I keep driving with code P2A61 active?

With caution: limp mode possible, have it checked soon

Common causes — P2A61

Signal wire shorted to ground Corroded or wet connector Faulty level sensor Pinched or chafed wiring Faulty control unit

How do you fix code P2A61?

Check the wiring and connector of the level sensor, looking for pinched spots or contact with metal. A technician can measure the signal to tell a wire problem from a sensor problem. If you smell gas, stop in the open air and have the system checked immediately.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes