Skip to content
Fault code dictionary (DTC)

U0246 — Lost communication with seat control module E

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit that stored this code is no longer receiving messages from the seat control module labelled "E" on the vehicle network. The standard only says communication is missing: which seat that is (front, rear, driver or passenger side) is up to the manufacturer, and I have no reliable information to say without your brand's wiring documentation. The fault is in the communication, not necessarily in the seat itself.
FamilyNetwork (U)

Typical symptoms

Power seat adjustments not responding
Seat position memories not working
Seat heating or ventilation not working
Airbag warning light or seat fault message on the dashboard
Other lost-communication codes appearing at the same time

Common causes

Loose or damaged connector or wiring under the seat
Low battery voltage or a battery that is failing
Blown fuse or interrupted power supply to the seat module
Moisture or spilled liquid under the seat
Faulty seat module
A problem on the network line (CAN or LIN) connecting the module

What to do

First check the battery condition and the fuses that power the seat, then the connectors under the seat, where wires and plugs suffer from movement and moisture. If the code appeared after a battery change or work on the seat, the cause is usually there. It does not require stopping the car immediately, but have it checked soon if it involves the seat airbag.

How to read code U0246

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code U0246 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U0246 mean?

Lost communication with seat control module E. The control unit that stored this code is no longer receiving messages from the seat control module labelled "E" on the vehicle network. The standard only says communication is missing: which seat that is (front, rear, driver or passenger side) is up to the manufacturer, and I have no reliable information to say without your brand's wiring documentation. The fault is in the communication, not necessarily in the seat itself.

Can I keep driving with code U0246 active?

With caution: limp mode possible, have it checked soon

Common causes — U0246

Loose or damaged connector or wiring under the seat Low battery voltage or a battery that is failing Blown fuse or interrupted power supply to the seat module Moisture or spilled liquid under the seat Faulty seat module A problem on the network line (CAN or LIN) connecting the module

How do you fix code U0246?

First check the battery condition and the fuses that power the seat, then the connectors under the seat, where wires and plugs suffer from movement and moisture. If the code appeared after a battery change or work on the seat, the cause is usually there. It does not require stopping the car immediately, but have it checked soon if it involves the seat airbag.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes