Skip to content
Fault code dictionary (DTC)

U0247 — Lost communication with seat control module F

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit is no longer receiving messages from the seat control module labelled "F". The standard only defines the loss of communication; which seat the letter refers to depends on the manufacturer, and I have no reliable information on that without your brand's data. The fault concerns the network dialogue, not necessarily the seat itself.
FamilyNetwork (U)

Typical symptoms

Power seat not moving or moving erratically
Memory positions cannot be recalled
Seat heating or ventilation off
Fault message or airbag warning light on the dashboard
Several lost-communication codes together

Common causes

Connector under the seat not fully seated or corroded
Flat battery or unstable voltage
Blown fuse or interrupted power to the seat module
Wires pinched or worn by seat movement
Faulty seat module
Interference or break on the network line

What to do

Start with the battery and fuses, then look at the connectors under the affected seat, without forcing them. If the seat controls still work and the code is intermittent, it is usually an unstable contact. If the airbag light is on, have the car checked without waiting.

How to read code U0247

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code U0247 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U0247 mean?

Lost communication with seat control module F. The control unit is no longer receiving messages from the seat control module labelled "F". The standard only defines the loss of communication; which seat the letter refers to depends on the manufacturer, and I have no reliable information on that without your brand's data. The fault concerns the network dialogue, not necessarily the seat itself.

Can I keep driving with code U0247 active?

With caution: limp mode possible, have it checked soon

Common causes — U0247

Connector under the seat not fully seated or corroded Flat battery or unstable voltage Blown fuse or interrupted power to the seat module Wires pinched or worn by seat movement Faulty seat module Interference or break on the network line

How do you fix code U0247?

Start with the battery and fuses, then look at the connectors under the affected seat, without forcing them. If the seat controls still work and the code is intermittent, it is usually an unstable contact. If the airbag light is on, have the car checked without waiting.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes