Skip to content
Fault code dictionary (DTC)

U0248 — Lost communication with remote accessory module

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit has stopped receiving messages from the remote accessory module, a unit that handles extra functions connected to the vehicle network. What exactly it controls varies from brand to brand, and I have no reliable information on that without the manufacturer's data. The code points to a communication or power supply problem with the module.
FamilyNetwork (U)

Typical symptoms

Accessories or comfort functions not responding
Remote controls or options working intermittently
Fault messages on the dashboard
Other modules reporting lost communication
Abnormal battery drain while parked

Common causes

Insufficient power or ground to the module
Corroded or loose connector
Blown fuse
Poorly fitted aftermarket accessory disturbing the network
Faulty module
Break on the network line (CAN or LIN)

What to do

Check the battery and fuses first, and think back to whether an accessory such as an alarm or extra equipment was recently fitted: it is one of the most common causes. Then have the other stored codes read, because they show which network line to look at. The car can normally be used, but do not put it off for long.

How to read code U0248

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code U0248 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U0248 mean?

Lost communication with remote accessory module. The control unit has stopped receiving messages from the remote accessory module, a unit that handles extra functions connected to the vehicle network. What exactly it controls varies from brand to brand, and I have no reliable information on that without the manufacturer's data. The code points to a communication or power supply problem with the module.

Can I keep driving with code U0248 active?

With caution: limp mode possible, have it checked soon

Common causes — U0248

Insufficient power or ground to the module Corroded or loose connector Blown fuse Poorly fitted aftermarket accessory disturbing the network Faulty module Break on the network line (CAN or LIN)

How do you fix code U0248?

Check the battery and fuses first, and think back to whether an accessory such as an alarm or extra equipment was recently fitted: it is one of the most common causes. Then have the other stored codes read, because they show which network line to look at. The car can normally be used, but do not put it off for long.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes