Skip to content
Fault code dictionary (DTC)

U024C — Lost communication with seat control module H

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit is no longer receiving messages from the seat control module labelled "H". The standard only defines that communication is absent; which seat it corresponds to is decided by the manufacturer, and I have no reliable information to say without data on your brand. The problem is in the communication network or the module's power supply.
FamilyNetwork (U)

Typical symptoms

Power seat not responding to controls
Memory positions cannot be recalled
Heating or ventilation not working
Fault message or airbag warning light
Several modules reporting lost communication

Common causes

Connector under the seat not fully seated
Flat or failing battery
Blown fuse
Worn or pinched wiring
Moisture around the module
Faulty seat module

What to do

Start with the battery and fuses, then check the connectors under the seat. If the code comes and goes, it is usually an unstable contact. If the airbag light is on, do not put off the check.

How to read code U024C

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code U024C starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U024C mean?

Lost communication with seat control module H. The control unit is no longer receiving messages from the seat control module labelled "H". The standard only defines that communication is absent; which seat it corresponds to is decided by the manufacturer, and I have no reliable information to say without data on your brand. The problem is in the communication network or the module's power supply.

Can I keep driving with code U024C active?

With caution: limp mode possible, have it checked soon

Common causes — U024C

Connector under the seat not fully seated Flat or failing battery Blown fuse Worn or pinched wiring Moisture around the module Faulty seat module

How do you fix code U024C?

Start with the battery and fuses, then check the connectors under the seat. If the code comes and goes, it is usually an unstable contact. If the airbag light is on, do not put off the check.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes