Skip to content
Fault code dictionary (DTC)

U024D — Lost communication with seat control module J

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit is no longer receiving messages from the seat control module labelled "J". The standard only defines the lack of communication; which seat it is depends on the manufacturer, and I have no reliable information to say without your brand's data. The fault is in the link to the module, not necessarily in the seat.
FamilyNetwork (U)

Typical symptoms

Power seat adjustments not working
Memory positions stuck
Heating or ventilation off
Airbag warning light or fault message
Other lost-communication codes at the same time

Common causes

Loose or corroded connector under the seat
Low battery voltage
Blown fuse or interrupted power to the module
Wires damaged by seat movement
Spilled liquid or moisture
Faulty seat module

What to do

Check the battery and fuses, then the connectors under the seat without forcing them. If the problem appeared after moving the seat or placing objects under it, start there. With the airbag light on, have the car checked without delay.

How to read code U024D

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code U024D starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U024D mean?

Lost communication with seat control module J. The control unit is no longer receiving messages from the seat control module labelled "J". The standard only defines the lack of communication; which seat it is depends on the manufacturer, and I have no reliable information to say without your brand's data. The fault is in the link to the module, not necessarily in the seat.

Can I keep driving with code U024D active?

With caution: limp mode possible, have it checked soon

Common causes — U024D

Loose or corroded connector under the seat Low battery voltage Blown fuse or interrupted power to the module Wires damaged by seat movement Spilled liquid or moisture Faulty seat module

How do you fix code U024D?

Check the battery and fuses, then the connectors under the seat without forcing them. If the problem appeared after moving the seat or placing objects under it, start there. With the airbag light on, have the car checked without delay.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes