Skip to content
Fault code dictionary (DTC)

U024E — Lost communication with side obstacle detection module C

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit is no longer receiving messages from the side obstacle detection module labelled "C", which is usually linked to blind-spot or lane-change assist sensors. Which side or position "C" refers to depends on the brand, and I have no reliable information to say in general. While the fault remains, the assist system may not work.
FamilyNetwork (U)

Typical symptoms

Warning light or fault message for the blind-spot assist
Blind-spot warning missing or intermittent
False or missed alerts when changing lane
Side sensors reported as unavailable
Other lost-communication codes on the same side

Common causes

Loose sensor or module connector in the bumper or pillar
Bumper hit or repaired, with the module moved or damaged
Moisture or dirt in the connector
Weak battery or unstable voltage
Faulty detection module
Break on the network line

What to do

Check whether the bumper has had recent impacts or repairs, as this is the most common cause, and look at the sensor connectors. Do not rely on the blind-spot warning while the fault remains, and always check your mirrors. The car can be driven, but have the system checked soon.

How to read code U024E

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code U024E starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U024E mean?

Lost communication with side obstacle detection module C. The control unit is no longer receiving messages from the side obstacle detection module labelled "C", which is usually linked to blind-spot or lane-change assist sensors. Which side or position "C" refers to depends on the brand, and I have no reliable information to say in general. While the fault remains, the assist system may not work.

Can I keep driving with code U024E active?

With caution: limp mode possible, have it checked soon

Common causes — U024E

Loose sensor or module connector in the bumper or pillar Bumper hit or repaired, with the module moved or damaged Moisture or dirt in the connector Weak battery or unstable voltage Faulty detection module Break on the network line

How do you fix code U024E?

Check whether the bumper has had recent impacts or repairs, as this is the most common cause, and look at the sensor connectors. Do not rely on the blind-spot warning while the fault remains, and always check your mirrors. The car can be driven, but have the system checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes