Skip to content
Fault code dictionary (DTC)

U025A — Lost communication with special purpose control module B

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit that stored this code has stopped receiving messages from the special purpose vehicle control module labeled "B". The definition is standard, but which module that actually is depends on the manufacturer and the equipment fitted, so without knowing make and model I can't say for sure which component it is. The code points to a network communication problem; it does not by itself prove the module is faulty.
FamilyNetwork (U)

Typical symptoms

Warning light on the dashboard
A special or accessory function of the vehicle stops working
Other network error codes stored alongside this one
Functions that come and go intermittently
The code comes straight back after being cleared

Common causes

Corroded or loose module connector
Damaged or shorted communication wiring
Insufficient power or ground to the module (fuse, relay)
Weak battery causing voltage drops
Internal module fault or outdated software
Accessory or modification installed incorrectly

What to do

Have all stored codes read, not just this one: if several network errors appear, the cause is usually a shared power supply or wiring problem. Check the battery, fuses and the module's connectors first. It is not a safety emergency by itself, but if the affected function involves brakes or steering, have it checked right away.

How to read code U025A

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code U025A starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U025A mean?

Lost communication with special purpose control module B. The control unit that stored this code has stopped receiving messages from the special purpose vehicle control module labeled "B". The definition is standard, but which module that actually is depends on the manufacturer and the equipment fitted, so without knowing make and model I can't say for sure which component it is. The code points to a network communication problem; it does not by itself prove the module is faulty.

Can I keep driving with code U025A active?

With caution: limp mode possible, have it checked soon

Common causes — U025A

Corroded or loose module connector Damaged or shorted communication wiring Insufficient power or ground to the module (fuse, relay) Weak battery causing voltage drops Internal module fault or outdated software Accessory or modification installed incorrectly

How do you fix code U025A?

Have all stored codes read, not just this one: if several network errors appear, the cause is usually a shared power supply or wiring problem. Check the battery, fuses and the module's connectors first. It is not a safety emergency by itself, but if the affected function involves brakes or steering, have it checked right away.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes