Skip to content
Fault code dictionary (DTC)

U025B — Lost communication with special purpose control module C

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit is no longer receiving messages from the special purpose vehicle control module labeled "C". The standard defines the code, but which module this is depends on the manufacturer, so without make and model I can't name the exact component. This is a network communication problem, not proof that the module needs replacing.
FamilyNetwork (U)

Typical symptoms

Warning light on
An accessory or special function does not respond
Other network codes stored in memory
Intermittent malfunctions
The code returns after being cleared

Common causes

Corroded or poorly seated connector
Broken or shorted communication wire
Faulty fuse, relay or ground for the module
Low battery or unstable voltage
Faulty module or outdated software
Accessory fitted after purchase and wired incorrectly

What to do

Have all stored codes read: seeing it alongside other network errors helps tell whether the fault is local or shared by several modules. Start with the battery, fuses and connectors. If the affected function is tied to brakes or steering, don't put off the check.

How to read code U025B

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code U025B starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U025B mean?

Lost communication with special purpose control module C. The control unit is no longer receiving messages from the special purpose vehicle control module labeled "C". The standard defines the code, but which module this is depends on the manufacturer, so without make and model I can't name the exact component. This is a network communication problem, not proof that the module needs replacing.

Can I keep driving with code U025B active?

With caution: limp mode possible, have it checked soon

Common causes — U025B

Corroded or poorly seated connector Broken or shorted communication wire Faulty fuse, relay or ground for the module Low battery or unstable voltage Faulty module or outdated software Accessory fitted after purchase and wired incorrectly

How do you fix code U025B?

Have all stored codes read: seeing it alongside other network errors helps tell whether the fault is local or shared by several modules. Start with the battery, fuses and connectors. If the affected function is tied to brakes or steering, don't put off the check.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes