Skip to content
Fault code dictionary (DTC)

U025C — Lost communication with special purpose control module D

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit is no longer receiving messages from the special purpose vehicle control module labeled "D". Exactly which module this is depends on the manufacturer and equipment, and without make and model I won't guess. The code reports a break in communication, not necessarily a broken component.
FamilyNetwork (U)

Typical symptoms

Warning light on
Special or accessory function missing
Several network codes stored together
Intermittent behavior
Code returns after being cleared

Common causes

Corroded or loose connector
Damaged network wiring
Incorrect power or ground to the module
Weak battery or unstable on-board voltage
Internal module fault
Incorrect installation of an accessory or modification

What to do

Have the full list of codes read and check the battery, fuses and the module's connectors first. If the fault is sporadic, look for corroded contacts or wires chafing. If it involves braking or steering functions, have the car checked without delay.

How to read code U025C

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code U025C starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U025C mean?

Lost communication with special purpose control module D. The control unit is no longer receiving messages from the special purpose vehicle control module labeled "D". Exactly which module this is depends on the manufacturer and equipment, and without make and model I won't guess. The code reports a break in communication, not necessarily a broken component.

Can I keep driving with code U025C active?

With caution: limp mode possible, have it checked soon

Common causes — U025C

Corroded or loose connector Damaged network wiring Incorrect power or ground to the module Weak battery or unstable on-board voltage Internal module fault Incorrect installation of an accessory or modification

How do you fix code U025C?

Have the full list of codes read and check the battery, fuses and the module's connectors first. If the fault is sporadic, look for corroded contacts or wires chafing. If it involves braking or steering functions, have the car checked without delay.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes