Skip to content
Fault code dictionary (DTC)

U0288 — Lost communication with DC/AC converter control module A

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit no longer gets a reply from the module that converts direct current to alternating current, typical of hybrid and electric cars, where it supplies electric motors or other devices, for example. The letter A marks one of the modules, but its exact use is decided by the manufacturer and I cannot say for certain. It concerns the high-voltage system.
FamilyNetwork (U)

Typical symptoms

Hybrid or high-voltage system warning light
Reduced power or limp mode
Function served by the converter unavailable
Car that will not start or will not move in electric mode
Other network codes

Common causes

Poor contact at the module communication connector or wiring
Unstable 12-volt supply to the module
Faulty fuse
Problem on the communication bus
Faulty converter
Software needing an update

What to do

Check the 12-volt battery. Do not touch orange cables or high-voltage components: qualified personnel are needed. If the hybrid system warning appears or power drops, have it checked soon.

How to read code U0288

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code U0288 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U0288 mean?

Lost communication with DC/AC converter control module A. The control unit no longer gets a reply from the module that converts direct current to alternating current, typical of hybrid and electric cars, where it supplies electric motors or other devices, for example. The letter A marks one of the modules, but its exact use is decided by the manufacturer and I cannot say for certain. It concerns the high-voltage system.

Can I keep driving with code U0288 active?

With caution: limp mode possible, have it checked soon

Common causes — U0288

Poor contact at the module communication connector or wiring Unstable 12-volt supply to the module Faulty fuse Problem on the communication bus Faulty converter Software needing an update

How do you fix code U0288?

Check the 12-volt battery. Do not touch orange cables or high-voltage components: qualified personnel are needed. If the hybrid system warning appears or power drops, have it checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes