Skip to content
Fault code dictionary (DTC)

U0289 — Lost communication with DC/AC converter (inverter) module B

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit stopped receiving messages from the second DC/AC converter, the part that turns high-voltage direct current into alternating current. This is a communication fault and does not by itself prove the converter is broken. The letter B means the vehicle has more than one such module; which one it is depends on the manufacturer.
FamilyNetwork (U)

Typical symptoms

Hybrid or electric system warning light on
Reduced power or limp mode
Vehicle will not start or will not enter electric mode
On-board power outlets, if fitted, not working
Other warning lights on at the same time

Common causes

Damaged or corroded data bus wiring or connector
Low or unstable 12-volt supply to the module
Weak or discharged 12-volt battery
Faulty fuse or relay feeding the module
Internal failure of the converter module
Module software needing an update

What to do

First check the 12-volt battery and the condition of fuses and connectors. On high-voltage systems do not touch the orange cables: diagnosis must be done by qualified staff. If power is reduced or the warning light is on, avoid long trips and have the car checked soon.

How to read code U0289

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code U0289 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U0289 mean?

Lost communication with DC/AC converter (inverter) module B. The control unit stopped receiving messages from the second DC/AC converter, the part that turns high-voltage direct current into alternating current. This is a communication fault and does not by itself prove the converter is broken. The letter B means the vehicle has more than one such module; which one it is depends on the manufacturer.

Can I keep driving with code U0289 active?

With caution: limp mode possible, have it checked soon

Common causes — U0289

Damaged or corroded data bus wiring or connector Low or unstable 12-volt supply to the module Weak or discharged 12-volt battery Faulty fuse or relay feeding the module Internal failure of the converter module Module software needing an update

How do you fix code U0289?

First check the 12-volt battery and the condition of fuses and connectors. On high-voltage systems do not touch the orange cables: diagnosis must be done by qualified staff. If power is reduced or the warning light is on, avoid long trips and have the car checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes