Skip to content
Fault code dictionary (DTC)

U028A — Lost communication with transmission fluid pump module B

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit no longer gets a reply from the second module that drives the electric transmission fluid pump. This pump keeps pressure in the gearbox when the engine is stopped or idling, for example in stop-start or hybrid systems. The code points to a communication problem, not necessarily a failed pump.
FamilyNetwork (U)

Typical symptoms

Late or jerky gear engagement
Transmission or engine warning light on
Stop-start function disabled
Gearbox in limp mode
Hesitant pull-away after a stop

Common causes

Damaged wiring or connector at the pump or module
Insufficient 12-volt supply
Weak battery
Faulty pump fuse or relay
Failed pump module
Incorrect transmission fluid level or condition

What to do

Check the 12-volt battery, fuses and connectors near the gearbox first. If the gearbox jerks or goes into limp mode, limit use of the car, because a gearbox without proper pressure can be damaged. Have the system checked soon.

How to read code U028A

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code U028A starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U028A mean?

Lost communication with transmission fluid pump module B. The control unit no longer gets a reply from the second module that drives the electric transmission fluid pump. This pump keeps pressure in the gearbox when the engine is stopped or idling, for example in stop-start or hybrid systems. The code points to a communication problem, not necessarily a failed pump.

Can I keep driving with code U028A active?

With caution: limp mode possible, have it checked soon

Common causes — U028A

Damaged wiring or connector at the pump or module Insufficient 12-volt supply Weak battery Faulty pump fuse or relay Failed pump module Incorrect transmission fluid level or condition

How do you fix code U028A?

Check the 12-volt battery, fuses and connectors near the gearbox first. If the gearbox jerks or goes into limp mode, limit use of the car, because a gearbox without proper pressure can be damaged. Have the system checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes