Skip to content
Fault code dictionary (DTC)

U0292 — Lost communication with drive motor control module B

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit no longer receives messages from the second module that controls the traction motor of a hybrid or electric car. This module manages the power sent to the electric motor. The code points to a communication problem, and the letter B tells it apart from other modules, depending on the manufacturer.
FamilyNetwork (U)

Typical symptoms

Hybrid or electric system warning light on
Loss of power or limp mode
Car will not start or stops while driving
Electric drive not available
Other warning lights on at the same time

Common causes

Damaged wiring or connector at the module
Discharged or weak 12-volt battery
Insufficient supply to the module
Faulty fuse or relay
Failed motor control module
Data bus or software problem

What to do

A car that loses drive can stop at dangerous moments: if the light is on and power drops, pull over safely as soon as you can. Check the 12-volt battery, but do not touch the orange high-voltage cables. Diagnosis must be done by qualified staff.

How to read code U0292

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code U0292 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U0292 mean?

Lost communication with drive motor control module B. The control unit no longer receives messages from the second module that controls the traction motor of a hybrid or electric car. This module manages the power sent to the electric motor. The code points to a communication problem, and the letter B tells it apart from other modules, depending on the manufacturer.

Can I keep driving with code U0292 active?

With caution: limp mode possible, have it checked soon

Common causes — U0292

Damaged wiring or connector at the module Discharged or weak 12-volt battery Insufficient supply to the module Faulty fuse or relay Failed motor control module Data bus or software problem

How do you fix code U0292?

A car that loses drive can stop at dangerous moments: if the light is on and power drops, pull over safely as soon as you can. Check the 12-volt battery, but do not touch the orange high-voltage cables. Diagnosis must be done by qualified staff.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes