Skip to content
Fault code dictionary (DTC)

U0425 — Invalid data from the auxiliary heater control module

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningA control unit received a message with invalid data from the auxiliary heater module (for example a fuel-fired independent heater or a supplementary electric heater). The module answers, but the information is not believable. It only exists on cars fitted with this equipment.
FamilyNetwork (U)

Typical symptoms

Auxiliary heater not starting or shutting off straight away
Cabin warming up poorly in winter
Heater warning light or fault message
Unusual smoke or smell from the fuel-fired heater
Pre-heating timer or remote not working

Common causes

Low or unstable battery voltage
Corroded or loose connector or wiring at the module
Faulty temperature sensor or glow element in the heater
Fuel supply problem to the heater
Internal or software fault in the module

What to do

If you notice smoke or a fuel smell from the heater, switch it off and do not use it until it has been checked. Otherwise the battery and connectors are checked first, then the heater module's codes are read.

How to read code U0425

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code U0425 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U0425 mean?

Invalid data from the auxiliary heater control module. A control unit received a message with invalid data from the auxiliary heater module (for example a fuel-fired independent heater or a supplementary electric heater). The module answers, but the information is not believable. It only exists on cars fitted with this equipment.

Can I keep driving with code U0425 active?

With caution: limp mode possible, have it checked soon

Common causes — U0425

Low or unstable battery voltage Corroded or loose connector or wiring at the module Faulty temperature sensor or glow element in the heater Fuel supply problem to the heater Internal or software fault in the module

How do you fix code U0425?

If you notice smoke or a fuel smell from the heater, switch it off and do not use it until it has been checked. Otherwise the battery and connectors are checked first, then the heater module's codes are read.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes