U0427 — Invalid data from the vehicle security control module
| Meaning | A control unit received a message with invalid data from the security module, which handles the alarm and door/opening monitoring. The module answers, but the information is not believable. What this module covers exactly changes from make to make. |
| Family | Network (U) |
Typical symptoms
Alarm light on or flashing abnormally
Central locking or remote unreliable
Battery going flat while parked
Engine not starting because of a security lock-out
Common causes
Faulty or dirty door, bonnet or boot sensor
Corroded connector or wiring at the module
Aftermarket alarm fitted later and poorly connected
Internal or software fault in the module
What to do
How to read code U0427
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code U0427 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code U0427 mean?
Invalid data from the vehicle security control module. A control unit received a message with invalid data from the security module, which handles the alarm and door/opening monitoring. The module answers, but the information is not believable. What this module covers exactly changes from make to make.
Can I keep driving with code U0427 active?
With caution: limp mode possible, have it checked soon
Common causes — U0427
Weak battery or unstable voltage Faulty or dirty door, bonnet or boot sensor Corroded connector or wiring at the module Aftermarket alarm fitted later and poorly connected Internal or software fault in the module
How do you fix code U0427?
Check the battery first, and that doors, bonnet and boot close properly. If an alarm was added later, have it checked first: badly made connections are a frequent cause of strange data. Then have the codes read.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: U0426 — Invalid data from the vehicle immobilizer control...
- Next code: U0428 — Invalid data from the steering angle sensor module
Related codes
- U0400 — Invalid Data Received from Network
- U0401 — Invalid Data Received From Engine Control Module
- U0402 — Invalid Data Received From Transmission Control Module
- U0403 — U0403 – Invalid data from transfer case control module
- U0404 — U0404 – Invalid data from gear shift control module
- U0405 — U0405 – Invalid data from cruise control module
- U0406 — U0406 – Invalid data from fuel injector control module
- U0407 — U0407 – Invalid data from glow plug control module
- U0408 — U0408 – Invalid data from throttle actuator control module
- U0409 — U0409 – Invalid data from alternative fuel control module
- U040A — U040A – Invalid data from air conditioning control module
- U040B — U040B – Invalid data from EGR control module A