Skip to content
Fault code dictionary (DTC)

U042A — Invalid data from the V2X module

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningA control unit received a message with invalid data from the V2X module, the system that lets the car communicate with other vehicles or infrastructure. The module answers, but the information is not believable. It is only found on recent cars with this equipment, so on many vehicles the code has no practical meaning.
FamilyNetwork (U)

Typical symptoms

Traffic or hazard warning functions not available
Connectivity system fault message
Driving aids that use external data switched off
Generic electrical fault light
Usually no effect on normal driving

Common causes

Outdated or faulty module software
Damaged antenna or its wiring
Low or unstable battery voltage
Corroded or loose connector at the module
Internal module fault or a communication problem

What to do

It is generally not a driving emergency, but have the codes read to see whether the problem is in the module or in another control unit. If the manufacturer has software updates for this module, that is often the first thing to check.

How to read code U042A

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code U042A starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U042A mean?

Invalid data from the V2X module. A control unit received a message with invalid data from the V2X module, the system that lets the car communicate with other vehicles or infrastructure. The module answers, but the information is not believable. It is only found on recent cars with this equipment, so on many vehicles the code has no practical meaning.

Can I keep driving with code U042A active?

With caution: limp mode possible, have it checked soon

Common causes — U042A

Outdated or faulty module software Damaged antenna or its wiring Low or unstable battery voltage Corroded or loose connector at the module Internal module fault or a communication problem

How do you fix code U042A?

It is generally not a driving emergency, but have the codes read to see whether the problem is in the module or in another control unit. If the manufacturer has software updates for this module, that is often the first thing to check.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes