U045A — Invalid data from parking assist control module A
| Meaning | A control unit received a message with invalid data from the parking assist module (the one for distance sensors, labeled "A"). Which exact module "A" is depends on the manufacturer, and I cannot say for certain without knowing the make. The problem concerns communication, not necessarily the sensors. |
| Family | Network (U) |
Typical symptoms
Wrong distance warnings
Parking assist fault message
Parking camera or display missing or inconsistent
No symptom during normal driving
Common causes
Damaged, oxidized or moisture-affected connector or wiring on the module or sensors
Weak battery or unstable voltage
Faulty parking assist module or outdated software
Another module on the network disturbing communication
What to do
How to read code U045A
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code U045A starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code U045A mean?
Invalid data from parking assist control module A. A control unit received a message with invalid data from the parking assist module (the one for distance sensors, labeled "A"). Which exact module "A" is depends on the manufacturer, and I cannot say for certain without knowing the make. The problem concerns communication, not necessarily the sensors.
Can I keep driving with code U045A active?
With caution: limp mode possible, have it checked soon
Common causes — U045A
Temporary disturbance on the communication line Damaged, oxidized or moisture-affected connector or wiring on the module or sensors Weak battery or unstable voltage Faulty parking assist module or outdated software Another module on the network disturbing communication
How do you fix code U045A?
Check that the sensors are clean and that there is no damage to the bumper or wiring after knocks or washing. Have the codes read from all control units. It is not urgent, but while it lasts be extra careful when maneuvering, because the aid may not work.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: U0459 — Invalid data from head-up display
- Next code: U045B — Invalid data from ABS control module B
Related codes
- U0400 — Invalid Data Received from Network
- U0401 — Invalid Data Received From Engine Control Module
- U0402 — Invalid Data Received From Transmission Control Module
- U0403 — U0403 – Invalid data from transfer case control module
- U0404 — U0404 – Invalid data from gear shift control module
- U0405 — U0405 – Invalid data from cruise control module
- U0406 — U0406 – Invalid data from fuel injector control module
- U0407 — U0407 – Invalid data from glow plug control module
- U0408 — U0408 – Invalid data from throttle actuator control module
- U0409 — U0409 – Invalid data from alternative fuel control module
- U040A — U040A – Invalid data from air conditioning control module
- U040B — U040B – Invalid data from EGR control module A