U045C — Invalid data from power steering control module B
| Meaning | A control unit received a message with invalid data from the power steering module (labeled "B"). Which module "B" is depends on the manufacturer, and I cannot say for certain without knowing the make. If the power steering is limited for safety, the steering can become heavier. |
| Family | Network (U) |
Typical symptoms
Steering heavier or with inconsistent assistance
Assistance dropping out at times, especially at low speed
Steering fault message on the instrument cluster
No obvious symptom in mild cases
Common causes
Damaged or oxidized connector or wiring on the power steering
Weak battery or unstable voltage
Faulty power steering module or outdated software
Another module on the network disturbing communication
What to do
How to read code U045C
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code U045C starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code U045C mean?
Invalid data from power steering control module B. A control unit received a message with invalid data from the power steering module (labeled "B"). Which module "B" is depends on the manufacturer, and I cannot say for certain without knowing the make. If the power steering is limited for safety, the steering can become heavier.
Can I keep driving with code U045C active?
With caution: limp mode possible, have it checked soon
Common causes — U045C
Temporary disturbance on the communication line Damaged or oxidized connector or wiring on the power steering Weak battery or unstable voltage Faulty power steering module or outdated software Another module on the network disturbing communication
How do you fix code U045C?
Check the battery right away and whether the steering has become heavier. If assistance is missing or inconsistent, drive carefully and have the car checked soon: sudden stiffening of the steering is dangerous when maneuvering. Have the codes read from all control units.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: U045B — Invalid data from ABS control module B
- Next code: U045D — Invalid data from automated driving control module...
Related codes
- U0400 — Invalid Data Received from Network
- U0401 — Invalid Data Received From Engine Control Module
- U0402 — Invalid Data Received From Transmission Control Module
- U0403 — U0403 – Invalid data from transfer case control module
- U0404 — U0404 – Invalid data from gear shift control module
- U0405 — U0405 – Invalid data from cruise control module
- U0406 — U0406 – Invalid data from fuel injector control module
- U0407 — U0407 – Invalid data from glow plug control module
- U0408 — U0408 – Invalid data from throttle actuator control module
- U0409 — U0409 – Invalid data from alternative fuel control module
- U040A — U040A – Invalid data from air conditioning control module
- U040B — U040B – Invalid data from EGR control module A