U045F — Invalid data from automated driving interface module A
| Meaning | A control unit received a message with invalid data from the automated driving system interface module (labeled "A"). This module acts as a bridge between the driver assistance systems and the rest of the car. Which physical module "A" is gets set by the manufacturer: I cannot say for certain without knowing the make. |
| Family | Network (U) |
Typical symptoms
Message on the cluster reporting an assistance fault
Warning light related to assistance systems
Assistance controls on the steering wheel not responding
No symptom with manual driving
Common causes
Damaged or oxidized connector or wiring on the interface module
Weak battery or unstable voltage
Faulty interface module or outdated software
Another module on the network disturbing communication
What to do
How to read code U045F
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code U045F starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code U045F mean?
Invalid data from automated driving interface module A. A control unit received a message with invalid data from the automated driving system interface module (labeled "A"). This module acts as a bridge between the driver assistance systems and the rest of the car. Which physical module "A" is gets set by the manufacturer: I cannot say for certain without knowing the make.
Can I keep driving with code U045F active?
With caution: limp mode possible, have it checked soon
Common causes — U045F
Temporary disturbance on the communication line Damaged or oxidized connector or wiring on the interface module Weak battery or unstable voltage Faulty interface module or outdated software Another module on the network disturbing communication
How do you fix code U045F?
Check the battery and restart the car to see whether the message goes away. Drive manually and do not rely on the assistants while the fault is present. Have the codes read from all control units at a workshop.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: U045E — Invalid data from automated driving control module...
- Next code: U0460 — Invalid data from automated driving interface modu...
Related codes
- U0400 — Invalid Data Received from Network
- U0401 — Invalid Data Received From Engine Control Module
- U0402 — Invalid Data Received From Transmission Control Module
- U0403 — U0403 – Invalid data from transfer case control module
- U0404 — U0404 – Invalid data from gear shift control module
- U0405 — U0405 – Invalid data from cruise control module
- U0406 — U0406 – Invalid data from fuel injector control module
- U0407 — U0407 – Invalid data from glow plug control module
- U0408 — U0408 – Invalid data from throttle actuator control module
- U0409 — U0409 – Invalid data from alternative fuel control module
- U040A — U040A – Invalid data from air conditioning control module
- U040B — U040B – Invalid data from EGR control module A