U0464 — Invalid data from navigation control module
| Meaning | A control unit received a message with invalid data from the module that handles navigation (the navigation computer, not the screen). The module is communicating, but the content is unusable. It concerns an information feature and not driving safety. |
| Family | Network (U) |
Typical symptoms
Map frozen or wrong directions
Navigation restarting or not switching on
Error messages on the infotainment system
No effect on driving
Common causes
Damaged or oxidized connector or wiring on the module or GPS antenna
Weak battery or unstable voltage
Faulty navigation module or outdated software or maps
Another module on the network disturbing communication
What to do
How to read code U0464
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code U0464 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code U0464 mean?
Invalid data from navigation control module. A control unit received a message with invalid data from the module that handles navigation (the navigation computer, not the screen). The module is communicating, but the content is unusable. It concerns an information feature and not driving safety.
Can I keep driving with code U0464 active?
With caution: limp mode possible, have it checked soon
Common causes — U0464
Temporary disturbance on the communication line Damaged or oxidized connector or wiring on the module or GPS antenna Weak battery or unstable voltage Faulty navigation module or outdated software or maps Another module on the network disturbing communication
How do you fix code U0464?
Switch the car off and on, check the battery and see whether the navigation finds its position outdoors. Have the codes read from all control units to rule out a network problem. It is not urgent for driving.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: U0463 — Invalid data from navigation display module
- Next code: U0465 — Invalid data from PTO control module
Related codes
- U0400 — Invalid Data Received from Network
- U0401 — Invalid Data Received From Engine Control Module
- U0402 — Invalid Data Received From Transmission Control Module
- U0403 — U0403 – Invalid data from transfer case control module
- U0404 — U0404 – Invalid data from gear shift control module
- U0405 — U0405 – Invalid data from cruise control module
- U0406 — U0406 – Invalid data from fuel injector control module
- U0407 — U0407 – Invalid data from glow plug control module
- U0408 — U0408 – Invalid data from throttle actuator control module
- U0409 — U0409 – Invalid data from alternative fuel control module
- U040A — U040A – Invalid data from air conditioning control module
- U040B — U040B – Invalid data from EGR control module A