U0467 — Invalid data from fuel additive control module
| Meaning | A control unit received a message with invalid data from the module that manages the fuel additive (for example the dosing of an additive for the particulate filter). The module is communicating, but the content is unusable. Not every car has this system, and the exact meaning depends on the manufacturer: I cannot say for certain without knowing the make. |
| Family | Network (U) |
Typical symptoms
Cluster message about the additive or exhaust
Filter regeneration more frequent or not completed
Reduced power or engine in limp mode
No obvious symptom in mild cases
Common causes
Damaged or oxidized connector or wiring on the module or additive pump
Weak battery or unstable voltage
Faulty dosing module or outdated software
Empty additive tank or stuck dosing pump
What to do
How to read code U0467
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code U0467 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code U0467 mean?
Invalid data from fuel additive control module. A control unit received a message with invalid data from the module that manages the fuel additive (for example the dosing of an additive for the particulate filter). The module is communicating, but the content is unusable. Not every car has this system, and the exact meaning depends on the manufacturer: I cannot say for certain without knowing the make.
Can I keep driving with code U0467 active?
With caution: limp mode possible, have it checked soon
Common causes — U0467
Temporary disturbance on the communication line Damaged or oxidized connector or wiring on the module or additive pump Weak battery or unstable voltage Faulty dosing module or outdated software Empty additive tank or stuck dosing pump
How do you fix code U0467?
Check whether the cluster shows a message about the additive level and check the battery. If the engine light is on or power is reduced, have the car checked soon, because an exhaust system problem can get worse. Have the codes read from all control units.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: U0466 — Invalid data from rear HVAC control module
- Next code: U0468 — Invalid data from fuel cell control module
Related codes
- U0400 — Invalid Data Received from Network
- U0401 — Invalid Data Received From Engine Control Module
- U0402 — Invalid Data Received From Transmission Control Module
- U0403 — U0403 – Invalid data from transfer case control module
- U0404 — U0404 – Invalid data from gear shift control module
- U0405 — U0405 – Invalid data from cruise control module
- U0406 — U0406 – Invalid data from fuel injector control module
- U0407 — U0407 – Invalid data from glow plug control module
- U0408 — U0408 – Invalid data from throttle actuator control module
- U0409 — U0409 – Invalid data from alternative fuel control module
- U040A — U040A – Invalid data from air conditioning control module
- U040B — U040B – Invalid data from EGR control module A