U046B — Invalid data from GPS module
| Meaning | A control unit received inconsistent data from the satellite positioning module. The cause could be the antenna, the module or the communication. It affects navigation and related services, not the mechanical side of the car. |
| Family | Network (U) |
Typical symptoms
Wrong or frozen position on the map
Wrong system clock or date
Connected services or emergency call unavailable
Error message on the infotainment display
Common causes
Corroded module connector
Internal failure of the GPS module or head unit
Infotainment software needing an update
Flat battery or power interruptions
Network interference from another module
What to do
How to read code U046B
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code U046B starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code U046B mean?
Invalid data from GPS module. A control unit received inconsistent data from the satellite positioning module. The cause could be the antenna, the module or the communication. It affects navigation and related services, not the mechanical side of the car.
Can I keep driving with code U046B active?
With caution: limp mode possible, have it checked soon
Common causes — U046B
GPS antenna unplugged, damaged or with a damaged cable Corroded module connector Internal failure of the GPS module or head unit Infotainment software needing an update Flat battery or power interruptions Network interference from another module
How do you fix code U046B?
First check whether the problem only appears in places like garages or tunnels. If it persists in the open, have the antenna and connections checked. It is not urgent for driving, but if the car has automatic emergency call do not put it off.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: U046A — Invalid data from sunroof control module
- Next code: U046C — Invalid data from A/C compressor control module
Related codes
- U0400 — Invalid Data Received
- U0401 — Invalid Data Received From ECM/PCM
- U0402 — Invalid Data Received From Transmission Control Module
- U0403 — U0403 – Invalid data from transfer case control module
- U0404 — U0404 – Invalid data from gear shift control module
- U0405 — U0405 – Invalid data from cruise control module
- U0406 — U0406 – Invalid data from fuel injector control module
- U0407 — U0407 – Invalid data from glow plug control module
- U0408 — U0408 – Invalid data from throttle actuator control module
- U0409 — U0409 – Invalid data from alternative fuel control module
- U040A — U040A – Invalid data from air conditioning control module
- U040B — U040B – Invalid data from EGR control module A