U047B — Invalid data from restraints system sensor K
| Meaning | A control unit received inconsistent data over the network from restraints system sensor K, meaning airbags and seat belts. Which sensor K is, is decided by the manufacturer and I cannot say without knowing the brand. It may be the sensor, a poor contact or a power supply problem. |
| Family | Network (U) |
Typical symptoms
Safety system fault message
Other communication codes stored
Airbags that may not deploy in a crash
Passenger airbag indicator in an abnormal state
Common causes
Damaged or crushed wiring
Low battery voltage
Faulty sensor K
Airbag control unit fault
Software needing an update
What to do
How to read code U047B
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code U047B starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code U047B mean?
Invalid data from restraints system sensor K. A control unit received inconsistent data over the network from restraints system sensor K, meaning airbags and seat belts. Which sensor K is, is decided by the manufacturer and I cannot say without knowing the brand. It may be the sensor, a poor contact or a power supply problem.
Can I keep driving with code U047B active?
With caution: limp mode possible, have it checked soon
Common causes — U047B
Corroded or loose connector Damaged or crushed wiring Low battery voltage Faulty sensor K Airbag control unit fault Software needing an update
How do you fix code U047B?
Have the airbag control unit read soon: while the light is on the system may not protect you in an accident. Do not remove restraint system parts yourself.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: U047A — Invalid data from restraints system sensor J
- Next code: U047C — Invalid data from restraints system sensor L
Related codes
- U0400 — Invalid Data Received from Network
- U0401 — Invalid Data Received From Engine Control Module
- U0402 — Invalid Data Received From Transmission Control Module
- U0403 — U0403 – Invalid data from transfer case control module
- U0404 — U0404 – Invalid data from gear shift control module
- U0405 — U0405 – Invalid data from cruise control module
- U0406 — U0406 – Invalid data from fuel injector control module
- U0407 — U0407 – Invalid data from glow plug control module
- U0408 — U0408 – Invalid data from throttle actuator control module
- U0409 — U0409 – Invalid data from alternative fuel control module
- U040A — U040A – Invalid data from air conditioning control module
- U040B — U040B – Invalid data from EGR control module A