Skip to content
Fault code dictionary (DTC)

B1305 — Accessory delay relay coil shorted to ground (B1305)

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe module detected that the accessory delay relay command circuit is connected to ground, so the command voltage does not reach the coil. The code is manufacturer-defined and the detail varies between makes.
FamilyBody (B)

Typical symptoms

Accessories not working with the ignition off
Radio and power windows cutting out immediately
Relay that does not click
Blown fuse
Body warning light

Common causes

Command wire with worn insulation touching ground
Harness pinched near the relay
Relay coil shorted
Connector with water or corrosion
Faulty body control module (rare)

What to do

Check the fuse, socket and wiring near the relay for pinched or rubbed wires. It is a comfort fault that will not stop the car, but sort it out soon to avoid damage to the command circuit.

How to read code B1305

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code B1305 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B1305 mean?

Accessory delay relay coil shorted to ground (B1305). The module detected that the accessory delay relay command circuit is connected to ground, so the command voltage does not reach the coil. The code is manufacturer-defined and the detail varies between makes.

Can I keep driving with code B1305 active?

With caution: limp mode possible, have it checked soon

Common causes — B1305

Command wire with worn insulation touching ground Harness pinched near the relay Relay coil shorted Connector with water or corrosion Faulty body control module (rare)

How do you fix code B1305?

Check the fuse, socket and wiring near the relay for pinched or rubbed wires. It is a comfort fault that will not stop the car, but sort it out soon to avoid damage to the command circuit.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes