Skip to content
Fault code dictionary (DTC)

B1307 — Oil level switch circuit shorted to battery voltage (B1307)

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe module detected a voltage that is too high on the oil level switch circuit, as if the wire were touching positive. The signal is therefore unreliable and says nothing certain about the real level. The code is manufacturer-defined and the detail varies between makes.
FamilyBody (B)

Typical symptoms

Wrong or fixed oil level indication
Light or message that does not match the real level
Warning light on
Level indication missing from the cluster

Common causes

Sensor wire with damaged insulation touching a live wire
Connector wet or soaked in oil
Faulty oil level sensor
Wiring damaged by heat or rubbing
Faulty body control module (rare)

What to do

Check the oil level with the dipstick, engine cold and car level. Then inspect the sensor wiring and connector. Oil level matters a lot for the engine, so do not put this check off.

How to read code B1307

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code B1307 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B1307 mean?

Oil level switch circuit shorted to battery voltage (B1307). The module detected a voltage that is too high on the oil level switch circuit, as if the wire were touching positive. The signal is therefore unreliable and says nothing certain about the real level. The code is manufacturer-defined and the detail varies between makes.

Can I keep driving with code B1307 active?

With caution: limp mode possible, have it checked soon

Common causes — B1307

Sensor wire with damaged insulation touching a live wire Connector wet or soaked in oil Faulty oil level sensor Wiring damaged by heat or rubbing Faulty body control module (rare)

How do you fix code B1307?

Check the oil level with the dipstick, engine cold and car level. Then inspect the sensor wiring and connector. Oil level matters a lot for the engine, so do not put this check off.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes