Skip to content
Fault code dictionary (DTC)

B1306 — Oil level switch circuit open (B1306)

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe module detected that the oil level switch circuit is open: the signal is not arriving. It does not mean the oil is low, but that the module cannot read the switch. The code is manufacturer-defined and the detail varies between makes.
FamilyBody (B)

Typical symptoms

Oil level light or message appearing for no reason
Oil level reading missing or wrong
Warning light on
No visible sign of oil leaks

Common causes

Switch connector unplugged or corroded
Broken wire, often from heat or vibration
Faulty oil level switch or sensor
Damaged wiring near the engine
Faulty body control module (rare)

What to do

First of all check the oil level with the dipstick, engine cold and car level, because you should not assume it is correct. Then check the sensor connector and wire. Until you know, do not trust the cluster's oil indication.

How to read code B1306

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code B1306 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B1306 mean?

Oil level switch circuit open (B1306). The module detected that the oil level switch circuit is open: the signal is not arriving. It does not mean the oil is low, but that the module cannot read the switch. The code is manufacturer-defined and the detail varies between makes.

Can I keep driving with code B1306 active?

With caution: limp mode possible, have it checked soon

Common causes — B1306

Switch connector unplugged or corroded Broken wire, often from heat or vibration Faulty oil level switch or sensor Damaged wiring near the engine Faulty body control module (rare)

How do you fix code B1306?

First of all check the oil level with the dipstick, engine cold and car level, because you should not assume it is correct. Then check the sensor connector and wire. Until you know, do not trust the cluster's oil indication.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes