B1412 — Driver window motor circuit shorted to battery
| Meaning | The control module found battery voltage on the driver's window motor circuit, where it should not be at that moment. B1412 is manufacturer-defined; the precise cause varies by brand. |
| Family | Body (B) |
Typical symptoms
Window not responding to controls
Fuse blowing repeatedly
Motor or wires hot
Burning smell from the door
Battery going flat when parked
Common causes
Harness pinched in the door passage
Motor with a shorted winding
Wet connector creating electrical bridges
Door module with a shorted output
Earlier repair with wrong connections
What to do
How to read code B1412
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code B1412 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B1412 mean?
Driver window motor circuit shorted to battery. The control module found battery voltage on the driver's window motor circuit, where it should not be at that moment. B1412 is manufacturer-defined; the precise cause varies by brand.
Can I keep driving with code B1412 active?
With caution: limp mode possible, have it checked soon
Common causes — B1412
Motor wire with damaged insulation touching a live cable Harness pinched in the door passage Motor with a shorted winding Wet connector creating electrical bridges Door module with a shorted output Earlier repair with wrong connections
How do you fix code B1412?
If you smell burning or the wires are hot, stop using the window and have the car checked right away: a short to positive can cause overheating. Otherwise check the harness and motor connector as a priority.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B1411 — Driver window motor circuit open
- Next code: B1413 — Driver window motor circuit shorted to ground
Related codes
- B1400 — Driver window one-touch relay circuit shorted to battery
- B1401 — Driver window one-touch relay circuit shorted to ground
- B1402 — Driver window down switch circuit fault
- B1403 — Driver window up switch circuit fault
- B1404 — Driver window down circuit open
- B1405 — Driver window down circuit shorted to battery
- B1406 — Driver window down circuit shorted to ground
- B1407 — Driver window up circuit open
- B1408 — Driver window up circuit shorted to battery
- B1409 — Driver window up circuit shorted to ground
- B1410 — Driver window motor circuit fault
- B1411 — Driver window motor circuit open