Skip to content
Fault code dictionary (DTC)

B1427 — Seat belt lamp circuit open

Severity: Informational Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control module detected that the seat belt warning lamp circuit is open, meaning there is no continuity. This code is defined by the manufacturer, so the exact meaning may vary with the brand. The fault concerns the warning, not the belts.
FamilyBody (B)

Typical symptoms

The seat belt light does not come on when the ignition is switched on
The lamp does not light with the belt unbuckled
The chime may or may not work
No other obvious problem

Common causes

Faulty lamp or LED
Broken wire or unplugged connector
Corroded contact in the cluster connector
Instrument cluster with an internal fault
Faulty control module

What to do

Check whether the light comes on for a few seconds when the ignition is switched on. Then check the connectors behind the cluster. Always buckle up, even if the light does not warn you.

How to read code B1427

This is an informational entry: it normally does not limit how the vehicle works.

The code B1427 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B1427 mean?

Seat belt lamp circuit open. The control module detected that the seat belt warning lamp circuit is open, meaning there is no continuity. This code is defined by the manufacturer, so the exact meaning may vary with the brand. The fault concerns the warning, not the belts.

Can I keep driving with code B1427 active?

With caution: limp mode possible, have it checked soon

Common causes — B1427

Faulty lamp or LED Broken wire or unplugged connector Corroded contact in the cluster connector Instrument cluster with an internal fault Faulty control module

How do you fix code B1427?

Check whether the light comes on for a few seconds when the ignition is switched on. Then check the connectors behind the cluster. Always buckle up, even if the light does not warn you.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes