B1723 — Driver seat rearward switch circuit shorted to battery voltage
| Meaning | The control module has detected battery voltage on the driver's seat rearward switch circuit when there should not be any. The code is manufacturer-defined and the exact meaning can vary by brand. It usually points to a wire touching a power supply or to a stuck switch. |
| Family | Body (B) |
Typical symptoms
The seat keeps moving or runs to the end of its travel
The rearward control does not respond
Other abnormal seat movements
Possible body warning light or message, depending on the model
Common causes
Wire with damaged insulation touching a power cable
Liquid inside the switch pack
Damaged connector under the seat
Faulty seat control module (uncommon)
What to do
How to read code B1723
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code B1723 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B1723 mean?
Driver seat rearward switch circuit shorted to battery voltage. The control module has detected battery voltage on the driver's seat rearward switch circuit when there should not be any. The code is manufacturer-defined and the exact meaning can vary by brand. It usually points to a wire touching a power supply or to a stuck switch.
Can I keep driving with code B1723 active?
With caution: limp mode possible, have it checked soon
Common causes — B1723
Seat switch stuck in the pressed position Wire with damaged insulation touching a power cable Liquid inside the switch pack Damaged connector under the seat Faulty seat control module (uncommon)
How do you fix code B1723?
If the seat moves by itself, don't adjust it while driving and keep the space around it clear. Have the switch pack and the wiring under the seat checked. If the motor keeps running it can drain the battery or overheat, so don't leave it for long.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B1722 — Driver seat rearward switch circuit open
- Next code: B1724 — Driver seat rearward switch circuit shorted to gro...
Related codes
- B1700 — Passenger seatbelt tension reducer circuit short to ground
- B1701 — Driver seat recline forward switch circuit failure
- B1702 — Driver seat recline forward switch circuit open
- B1703 — Driver seat recline forward switch circuit short to battery
- B1704 — Driver seat recline forward switch circuit short to ground
- B1705 — Driver seat recline rearward switch circuit failure
- B1706 — Driver seat recline rearward switch circuit open
- B1707 — Driver seat recline rearward switch circuit short to battery
- B1708 — Driver seat recline rearward switch circuit short to ground
- B1709 — Driver seat front up switch circuit failure
- B1710 — Driver seat front up switch circuit open
- B1711 — Driver seat front up switch circuit short to battery