B1730 — Driver seat rear down switch circuit open
| Meaning | The control module has detected that the circuit of the switch that lowers the rear of the driver's seat is open, meaning the electrical connection is broken somewhere. The code is manufacturer-defined and details vary by brand. When you press the control, the module receives no signal. |
| Family | Body (B) |
Typical symptoms
The other seat movements work
The control works only now and then
No motor noise when pressing the control
Possible body warning light or message, depending on the model
Common causes
Wire broken by the wear of the seat movements
Worn internal contact in the switch
Loose terminal inside the connector
Seat control module problem (uncommon)
What to do
How to read code B1730
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code B1730 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B1730 mean?
Driver seat rear down switch circuit open. The control module has detected that the circuit of the switch that lowers the rear of the driver's seat is open, meaning the electrical connection is broken somewhere. The code is manufacturer-defined and details vary by brand. When you press the control, the module receives no signal.
Can I keep driving with code B1730 active?
With caution: limp mode possible, have it checked soon
Common causes — B1730
Connector under the seat unplugged or corroded Wire broken by the wear of the seat movements Worn internal contact in the switch Loose terminal inside the connector Seat control module problem (uncommon)
How do you fix code B1730?
Check whether the seat responds to the other controls and inspect the connector under the seat with the car off. An open circuit almost always comes from a contact or a wire. It is not urgent for driving, but it should be fixed so you can adjust your driving position.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B1729 — Driver seat rear down switch circuit fault
- Next code: B1731 — Driver seat rear down switch circuit shorted to ba...
Related codes
- B1700 — Passenger seatbelt tension reducer circuit short to ground
- B1701 — Driver seat recline forward switch circuit failure
- B1702 — Driver seat recline forward switch circuit open
- B1703 — Driver seat recline forward switch circuit short to battery
- B1704 — Driver seat recline forward switch circuit short to ground
- B1705 — Driver seat recline rearward switch circuit failure
- B1706 — Driver seat recline rearward switch circuit open
- B1707 — Driver seat recline rearward switch circuit short to battery
- B1708 — Driver seat recline rearward switch circuit short to ground
- B1709 — Driver seat front up switch circuit failure
- B1710 — Driver seat front up switch circuit open
- B1711 — Driver seat front up switch circuit short to battery